[4.2.2] Lightweight LolliFox ROM For MTK6572*Only 126MB*

Custom ROM For MT6572

The most Lightest, Smoothest and Fastest ROM ever. Better Than Stock ROM.

New Version V1.0 : http://www.mtkroms.com/2015/11/lightweight-lollifox-v10-for-mt6572.html

I take no responsibility for any damage to your device, Credits go to the creator and Developer of the ROM

Note : Backup your IMEI Number You Might Lose It.


For All : Micromax, Karbonn, ZTE, Huawei, Dogee, All Samsung Clones, All iPhone Clones and all MTK Devices (MUST PORT FIRST, GUIDE TO PORT BELOW)

SCREENSHOTS :






-Only 126 MB (The most lightest)
-Super Smooth, Smoother than Stock ROM
-Awesome RAM Management
-Pure Lollipop UI
-Fully Deodexed
-Holo UI
-Full Lollipop Features

-You can't differentiate it with the real Android Lollipop

How To Port :
Just Replace the boot.img in the ROM with your stock ROM boot.img and change the mount Points

To change Mount Points :
Open META-INF/com/google/android

Right Click On Updater Script And select Edit With Notpad++

Download Notepad++ : Here

Edit it like this

Verify /system should be mounted in "/dev/block/mmcblk0p
S
" & /data should be mounted in "/dev/block/mmcblk0p
D
"

What is S and D?
S – System Mount Point
D – Data Mount Point
To know these mount point values
- Open MTK Droid Tool after connecting your phone to PC.
- Open Block Maps.
- Check these lines.




Change accordingly these lines in meta-inf/com/google/android/updater-script
format("ext4", "EMMC","/dev/block/mmcblk0p5", "0");
mount("ext4", "EMMC","/dev/block/mmcblk0p5", "/system");
mount("ext4", "EMMC","/dev/block/mmcblk0p7", "/data");

Make a zip after porting complete and flash


137 comments:

  1. links not working bro either it is of jb 4.3 or lollipop

    ReplyDelete
    Replies
    1. links are working. just checked
      please read the title it says 4.2.2
      it is a lollipop themed android 4.2.2 rom

      Delete
    2. Is there real 4.3 rom....?

      Delete
    3. please check the blog i already have a real 4.3 ROM

      Delete
  2. Excuse me but, the engineer mode have limitations, my front camera dont works and i need to fix my imei and on this rom i can't

    ReplyDelete
    Replies
    1. yes because it is a lightweight version. you have to give up on somethings to make the rom lighter. sorry but i did not have the camera issue and i replaced my IMEI successfully

      Delete
  3. I followed the above steps for porting to my Karbonn A12+ running on MT6572, but when I try to install the zip, CWM says "Installation failed".

    Another quetion, the given updater-script has these lines:
    format("ext4", "EMMC", "/dev/block/mmcblk0p4", "0", "/system");
    mount("ext4", "EMMC", "/dev/block/mmcblk0p4", "/system");

    There is no line about /data: Should I add it, or leave it as it is? Anyway, I have tried both.
    Also the format command is different from the one mentioned in the blog.

    ReplyDelete
    Replies
    1. you have not ported it as instructed, have you replaced the boot.img ?
      no don't add it. don't mess with any part of updater-script just change the mount points accordingly

      Delete
  4. Hi, Thanks for your good work. I have some problem about the lollifox rom 1.9.1 beta that I have downloaded from other site. Problem 1. Data connection not working, 2. There is not screen lock option in settings. Can't using pattern lock. can you please give the solution? Is your lollifox rom for single sim?

    ReplyDelete
    Replies
    1. it is single SIM. Lollifox is very light ROM and many functions have been removed from it. are you getting Network in your device or not ?

      Delete
  5. Yes I am getting Network. But when I am activating Data connection nothing happens at all.

    ReplyDelete
  6. Turned off wifi but no change. Does your lollifox rom has pattern lock option? and can I use dual SIM?

    ReplyDelete
    Replies
    1. you have to add a APN ask your Network provider how to add a APN. no pattern lock only single SIM

      Delete
  7. Bro i downloaded this,
    But befor flashing i want to know about updater script...i m not clear about updater script editing
    Can u upload a edited exple of udater script or a video tutorial...

    ReplyDelete
    Replies
    1. read before you comment i am no longer supporting this ROM

      Delete
  8. is the truth that is because I have the 1.9.2 and 1.9.1 e eh searched and found no updates on other pages? that differences have?

    ReplyDelete
  9. Camera bug. Images turning black when flash is turned ON. My device is Micromax Bolt A068. Please help. Same camera isue with purelolli Rom http://mtk65roms.blogspot.in/2015/02/422lollipop-ui-custom-rom-for-your.html

    ReplyDelete
  10. you camera module does not seem to support my ROMs, since no one till now has faced that bug.

    replace all libcam files in /system/lib from stock to port

    ReplyDelete
  11. Hi I have downloaded this ROM and is very perfect and fast but I have one problem, the total audio non working (ring, notification,music ecc) but perfect working in headphone. I try a reset,wipe ecc but the problem not resolved. Please help me!?

    ReplyDelete
    Replies
    1. replace /system/libaudio.primary .so from stock to port

      Delete
  12. Thank you very much! One last info, its possible install the italian language in the system? Because in this ROM exist only 3 languages! Thanks e sorry for my bad english :)

    ReplyDelete
  13. Bro, i have new two problem, first is when i change the DPI in build.prop (240 to 220) at reboot the screen is not changed but the values on build prop is changed.
    Second problem is continuos message error for android media process has stopped. Sorry for bad english. Ehi bro i sign up in mediafire with your link! ;) you are biiiig :D

    ReplyDelete
    Replies
    1. Does your device support 220 DPI ? WHAT IS THE DPI in your stock ROM

      Ask me this question later via email since we had a 7.4 earthquake and a 6.3 aftershock and 5-6 5.0+ aftershocks very limited network. Pray for Nepal and tje people

      Delete
    2. bro in the stock rom i setting the dpi to 240 a 200 or 240 at 180 and all work perfect!
      i pray bro i pray :)

      Delete
    3. the DPI change is not supported since i removed a lot of features to make it lighter

      Delete
    4. there is a way to recover these features also from another rom or my stock, so that it can re-enable the change DPI, believe me it is fundamental, and whatever they tell me I will understand the chew very well I.
      thank you bro

      Delete
  14. Camera issue still exists. I replaced all libcam files from stock to port. But issue still exists. I found a weird thing with my camera. When I click photos in bright sunshine with flash turned ON the don't turn black. Is the light sensor responsible for this issue. Please help me. Also after replacing the files auto focus is not working. My stock camera do not have autofocus. Please help me. :( :p

    ReplyDelete
    Replies
    1. Go back to your stock ROM your camera drivers are not supported by my ROMs. read the reply just above this i have information about the current situation i am faxing

      Delete
  15. Please make update.zip for arabic language

    ReplyDelete
  16. It bootloops are flashing the rom. What should I do?

    ReplyDelete
    Replies
    1. you flashed directly, you have to port the ROM first dude

      Delete
    2. I did port it out. Anyways, it boot, but got no network, I did try the IMEI missing guide, still no network!

      Delete
    3. you have to reflash stock ROM using SP flash tool get the IMEI back then you have to report the ROM using my new porting guide, it is the second post in my homepage

      Delete
    4. Ok, will try to flash stock and then flash the custom rom. Then i will let you know.

      Delete
    5. Now, the camera does not work.

      Delete
    6. Do you know how can I make my External SD appear as my primary sd?

      Delete
    7. The phone reboots when I open the camera app

      Delete
    8. replace from stock to port

      \system\lib\hw\camera.default.so
      \system\lib\libcamera_client.so
      \system\lib\libcameracustom.so
      \system\lib\libcameraprofile.so
      \system\lib\libcameraservice.so
      \system\lib\libmhal.so
      \system\lib\libmhalcontent.so
      \system\lib\libmhaldrv.so
      \system\lib\libmhalmdp.so
      \system\lib\libmhalpipe.so
      \system\lib\libmhalscenario.so
      \system\lib\libmhalutility.so
      \system\etc\permission\android.hardware.camera.fro nt.xml
      \system\etc\permission\android.hardware.camera.xml

      Delete
    9. I know I must replace something in vold.fstab . But i dont know what exactly.

      Delete
    10. vold.fstab is vold.fstab you cannot replace something inside vold.fstab

      Delete
    11. Anyways, I did a self edit of vold.fstab, and it worked ;)

      Delete
    12. edited the code ? can you tell what you did ?

      Delete
    13. oh you mean for swaping the sd with the internal, oh that is easy by changing mount points in vold.fstab. I thought you fixed camera issue by editing vold.fstab

      Delete
    14. you just have to make sdcard0 to sdcard1 and sdcard1 to sdcard0

      Delete
  17. brother no loudspeaker sounds..earspeaker and headset works...thank you please help

    ReplyDelete
    Replies
    1. i also had a screen upside problem. i fixed it with your tutorial.and my default camera app working upside down.when i switched to front camera,it will crash and.cant open again.i installed other camera application and same problem.please help thank you

      Delete
    2. replace /system/lib/libaudio.primary.default.so

      Delete
    3. are you using your stock Camera app ? you should use the Lollifox Camera app get it back

      Delete
    4. thank you it fixed audio problem.
      i fix my screen upside down problem adding ro.hwrotation=180 to build prop.
      now my camera shows upside down video.if i switched to front camera,it will stop responding aand never opens bck gain.please help.thnk you

      Delete
  18. replace from stock to port :
    \system\lib\hw\camera.default.so
    \system\lib\libcamera_client.so
    \system\lib\libcameracustom.so
    \system\lib\libcameraprofile.so
    \system\lib\libcameraservice.so
    \system\lib\libmhal.so
    \system\lib\libmhalcontent.so
    \system\lib\libmhaldrv.so
    \system\lib\libmhalmdp.so
    \system\lib\libmhalpipe.so
    \system\lib\libmhalscenario.so
    \system\lib\libmhalutility.so
    \system\etc\permission\android.hardware.camera.fro nt.xml
    \system\etc\permission\android.hardware.camera.xml

    ReplyDelete
  19. Dude will this rom work with my Karbonn A92... It has MT6572 but its ubifs system..... and too I'm not able to port recovery.... :( please HELP!

    ReplyDelete
  20. it's there any chances to get this on spanish or not?

    ReplyDelete
  21. Default, the security like Pattern and Password are not allowed, nor I was able to Use Xposed Knock Code. How to bring the security features back?

    ReplyDelete
    Replies
    1. use any lock app from playstore

      Delete
    2. Those apps don't override FMD Locker :3

      Delete
  22. As you can adapt this rom a Huawei Y330

    ReplyDelete
  23. This firmware will go to Fly iq456 Fly Era Life 2 he also MTK6572

    ReplyDelete
  24. Dude... My phone is stuck at boot logo and whenever i boot into recovery I get this error message.. "cannot attach MTD15" please help!! :(

    ReplyDelete
  25. I found that if I want to call a number, it must be saved, else it won't call, how to fix that?

    ReplyDelete
  26. Ajit am trying to port this ROM but my phone is stuck in bootloop can you poprt it for me? I can provide the relevant files....

    ReplyDelete
  27. Thx for giving new life for my Archos 50 Titanium. The Stock Rom was aweful because of the performance, but this one runs smother than butter. :D

    ReplyDelete
    Replies
    1. nice have fun. Try out the performance boost tweak it is the first post in the homepage. It will make your device even faster

      Delete
  28. why my camera takes photos at 4MP ? (my phone camera is 8 megapx) what to change ?

    ReplyDelete
  29. i cannot replace any files from stock ?

    ReplyDelete
  30. Phone keeps freezing using my boot.img, on boot freezes like 3 times and restarts, it finnally starts the system, and freezes on updating apps like 3 times too and rebooting between each one, finnaly i get to chose the language but it freezes and reboots everytime, what could it be?

    ReplyDelete
    Replies
    1. report the ROM using this guide :
      https://www.youtube.com/watch?v=lU9ql6qoO68
      subscribe to my channel and please like the video

      Delete
    2. after porting i got bootloop, if i dont port it, and use only stock boot.img i get freezes like i said first.

      Delete
    3. a good port never results in a bootloop

      Delete
  31. Please provide navigation bar support .....it does not work...and also give ota support if possible...
    Thanx man

    ReplyDelete
  32. Hello friend, first of all I appreciate your input, but certainly, I need this rom completely in Spanish, it will be possible? Thanks and regards

    ReplyDelete
    Replies
    1. nope not possible, I do not have time to add languages to ROMs it takes a very long time

      Delete
  33. Hello MTK Hacker Pro, Thanks for this but I'm confused as there is no this line mount("ext4", "EMMC", "/dev/block/mmcblk0p4", "/data"); in updater script. What should I do ?
    Should I add it by myself or just leave it and update mount point only for mount("ext4", "EMMC", "/dev/block/mmcblk0p4", "/system"); ?

    ReplyDelete
    Replies
    1. all you need to do is change mount points in the port ROM updater-script with your own mount points

      Delete
    2. Sir thanks for your reply, please give you five minutes, sir in updater script there are only two lines
      format("ext4", "EMMC", "/dev/block/mmcblk0p4", "0", "/system");
      mount("ext4", "EMMC", "/dev/block/mmcblk0p4", "/system");

      The third one is not in the script :(

      Delete
    3. *all you need to do* is change mount points in port rom updater-script with stock mount points

      Delete
  34. Flashed it after that flashing I found that it's a mixture of third pasty apps, Great work.
    But there is one problem that my mobile's display gone upside down :(
    Please tell me solution. Sorry for bad English.

    ReplyDelete
    Replies
    1. in the tutorials section of this website there is a guide to fix it

      Delete
  35. When will you update the rom to v1.10? Thanks in Advance!

    ReplyDelete
  36. i am changing the files as u said then at the installation it was showing installation aborted...if i am not changing the files then my phone is strucking in bootloop

    ReplyDelete
    Replies
    1. i will post the updated version by tomorrow. Please wait for it

      Delete
  37. Is there any way of changing the volume language from russian to english? If I press the volume it gives me options in russian. Please let me know if there is a fix. Thanks.

    ReplyDelete
  38. the Rom is awesome.it is lug & bug free in my device. Good work Ajit..\
    and the Rm also supports dual Sim in my phone..amazing.
    while porting i added mount data line and worked for me,all data came intact with new Rom, but for security you have to use 3rd party apps

    ReplyDelete
  39. the Rom is awesome.it is lug & bug free in my device. Good work Ajit..\
    and the Rm also supports dual Sim in my phone..amazing.
    while porting i added mount data line and worked for me,all data came intact with new Rom, but for security you have to use 3rd party apps

    ReplyDelete
  40. I have problem in google play store
    after download apps it dosent install it pleas help

    ReplyDelete
    Replies
    1. there is a new version of this ROM, try it out. You can find it here. Lollifox v1.10

      Delete
    2. when I flashed v1.10 SD card doesn't work

      Delete
    3. did you replace vold.fstab and vold.fstab.nand ?

      Delete
  41. Why i can't use my SD Card after flashing this rom ?

    ReplyDelete
    Replies
    1. did you replace vold.fstab and vold.fstab.nand

      Delete
    2. replace storage_list.xml from stock framework-res.apk to port framework-res.apk

      Delete
  42. Mr.Ajit...i succesfully port this rom and run it....but after install app..my phone reboot by itself...how to fix it?

    ReplyDelete
  43. Successfully port ROM but problem in google play store
    After download apps doesn't install it pleas reply

    ReplyDelete
    Replies
    1. please try the new version of this ROM

      Delete
    2. I.m using lolifox v1.10
      But same problem :(

      Delete
  44. Please, help for resolve no sim detect.. Audio n camera now ok.. Thanks..

    ReplyDelete
    Replies
    1. replace /etc/bluetooth,firmware,security,wifi and then restore IMEI backup using MTK Droid Tools

      Delete
  45. Google play in loloifox v1.10 download but didn't install app after download it pleas reply

    ReplyDelete
  46. this rom is awesome .. very smooth but the problem is that it supports only 3 languages
    Can you make it support all the languages for me ????????

    ReplyDelete
    Replies
    1. development stopped on this version long ago, there is new version in this website

      Delete
    2. i have the latest version 1.10 but it doesn't support arabic at all
      Can you imagine with me some one who cannot write or read in his language like me
      it's completely disappointed
      plz help me to support the arabic font

      Delete
    3. sorry, but there is no further development

      Delete
    4. thats suck !!
      you edit on rom to make it smooth ok that's good
      but why deleting arabic font .. i think it's excited Basically on the original rom from google .. cause i can select arabic from language and input but the phone can't recognize it at all ..

      Delete
    5. don't use this ROM then, did I force you to use it ? no right. It was to make this ROM light

      Delete
  47. external sd card not mounting please help

    ReplyDelete
  48. Can i use android lolipop or marshmallow on my phone with cpu MTK 6572 which runs Jelly Bean ?

    ReplyDelete

Powered by Blogger.