[4.4.2] Asus ZenFone 2 UI For MT6592

Custom ROM For MT6592



Asus ZenFone 2 UI is an aftermarket ROM for MT6592 devices. This ROM has full ZenFone UI and features. A Good ROM with good battery backup, smooth good for gaming.
To be honest I am not a big fan of the ROM and this doesn't mean that it has bugs or something like that, it is bug free and smooth ROM which can replace your stock ROM, but I have been using Lollipop for a quiet a long time and want to stick to material design of Lollipop.



This ROM has been powered by www.mtkroms.com

Give proper credits to the people mentioned below in the credits section. And remember to always post the link of this thread in your posts. Credits should be top priority. The credits must look like this :
"This ROM has been powered by http://mtkroms.com, the original ROM can be found at http://www.mtkroms.com/" This is a must, lot of hardwork has gone to make these ROMs




- ZenFone 2 UI
- ZenFone Features
- Stable
- No bugs
- Good RAM management
- Good battery backup
- Reduces overheating issues by 60% awesome !
- Much more..........

- Delete boot.img in port ROM and use boot.img of Stock ROM
- Replace /etc/bluetooth,firmware,security,wifi from stock to port
- Replace libMali.so
- Edit Mount Points in /META-INF/com/google/android/

Note : If you do not have your stock updater-script follow the steps from step 18 to edit mount points without stock-updater-script : Edit mount points

- ZIP ROM
- Flash


To Fix Camera :
- libcamalgo.so
- libcameracustom.so
- libcamdrv
- camera.default.so

Join my FB Group for Updates on this ROM and more support :
https://www.facebook.com/groups/mtkroms/

- Ajit Guraya
- Nameless Team
- Nova Team

55 comments:

  1. unfortunately notification flashlight has stopped error

    ReplyDelete
  2. i replaced libfeaturio.so but still unfortunately notification flashlight has stopped error

    ReplyDelete
    Replies
    1. does your device support notification led ?

      Delete
  3. i replace libcamalgo.so but still the same error :(

    ReplyDelete
  4. The boot animation is appearing reaptly in my phone :( is there any soloution?

    ReplyDelete
  5. please help me out my phone is stuck at the boot animation and boot animation is appearing repeatedly

    ReplyDelete
    Replies
    1. the post has been updated with a new guibe, report the ROM

      Delete
    2. Thanks for replying.. I've tried the updated guide but but now it's showing installation aborted ..I've downloaded almost all roms here, given in this site for mtk6592 ..I'm following the guide what are given but with my device none of them booting up..Sometime it shows installation aborted or sometimes the bootanimation play repeatedly.. Maybe I'm doing something wrong so I need some help ...

      Delete
    3. It's showing status 6 installation aborted

      Delete
    4. I've tried pilz also bt still same prb

      Delete
  6. i ported rom differently i ported bluetooth firmware security wifi from stock to port now i am not having flashlight error but now i am stuck on asus agreement cant click ok for agreement to get close now what to do?

    ReplyDelete
    Replies
    1. must scroll the whole written agreement and then select one of the options and press OK

      Delete
  7. it isnt scrolling :( it is stucked i cant click ok plz help

    ReplyDelete
  8. its not scrolling ok button is unclickable, i m touching agreement to scroll but unsucceeded

    ReplyDelete
    Replies
    1. it hapen to me to
      enter on recovery,mount system,go to file manager and delete from system/app the asus setup wizard.apk and reboot

      Delete
  9. ported successfully ,ty for that!
    But my phone doesn't have hardware navigation keys...how to enable the navigation keys? I tried the build.prop tweak but still out of luck :(
    Also camera appears green...what files do i need to replace?

    ReplyDelete
    Replies
    1. add this at the end of build.prop "qemu.hw.mainkeys=1" without "" and visit Q/A post for Lollipop in this site there is a fix try that

      Delete
    2. actually i want to enable the soft navigation keys....not disable that

      Delete
    3. since i don't have capacitive buttons present in the phone

      Delete
    4. doesnt the value 1 disable navigation bar? and 0 enables it? btw i tried setting the value to 0 ,but still no nav bar(as i said i have already tried the build.prop tweak)

      Delete
    5. 0 = flase/no 1 = true/yes
      and after that must reboot

      Delete
    6. tried with 1 as well, still no soft nav keys :( replaced the generic.kl too but no luck...any?

      Delete
    7. ok it worked now...found a line "hw.show.navigationbar=no"..turning it to yes worked !

      Delete
    8. enjoy the taste of your hardwork, thanks for the info I didn't try to enable them since I don't use em, nice find appreciate it

      Delete
    9. Thanks for ur compliment,ajit. I have fixed every bug of my ported rom but a minor bug. How can i increase the camera resolution? my device supports upto 13mp and the camera app shows upto 8mp.How to fix that?

      Delete
    10. the ROM is not made for your device and will not have features of your device, you only ported it, so the camera resolution will stay the same as the device for which it was originally made for

      Delete
    11. Oh yeah, the rom doesn't support it. Anyways it is an excellent rom, very smooth, ui is good. THANKS ajit for this great rom!

      Delete
  10. thanks john it works for me, and ajit this is very nice and perfect rom thanks to you too

    ReplyDelete
  11. Hi! Tnx for this great ROM, one of the best I had. Were 2 problems - no audio, and wrong storage mounting. Audio fixed with libaudio.primary.default.so from lib, storage - vold from bin. Only one question. Radio buttons (single chose) stratched (they are not round). Is there are any way to fix it, or disable this style? Also in build.prop you set android version to 4.4.3, but 4.4.2 in title - which of them is true?

    ReplyDelete
    Replies
    1. 4.4.2, it won't affect anything, you will have to edit a lot of things for it, it is not a big issue

      Delete
    2. If I resolve it myself, is there a point in sending this fix to you? will it be useful for you?

      Delete
    3. i can fix it myself too but it is completely not necessary to go through the hassel of editing testing and uploading again and again

      Delete
  12. hello ajit
    any idea how to solve glove mode?

    ReplyDelete
    Replies
    1. there is no glove mode in this ROM

      Delete
    2. the touch too sensitivity in all other rom
      cm 11
      cm 12.1
      miui

      how i get the orginal glove mod from stock kernel?
      the device is cubot x9

      Delete
    3. use your stock ROM, or use some touch calibration app from play store

      Delete
    4. Hi ZERO DAY, Did you ported ROM for X9? is it working fine?

      Delete
  13. sd-ext is gone. Perhaps we need to copy the permissions in etc map also.

    ReplyDelete
  14. I cant flash it via TWRP-
    `error executing updater binary in zip` what im doing wrong?

    ReplyDelete
    Replies
    1. Same in CWM. Im tried it just now.

      Delete
    2. it is recovery issue, the recoveries you are using are not supported. Delete META-INF of this ROM and use META-INF of another working ROM which is highly not suggested

      Delete
    3. Same issue with me ..None of the Meta-inf are working :'(

      Delete
  15. how to fix camera blue and fix sim

    ReplyDelete

Powered by Blogger.